• Note1: Use only the TCP/IP network protocol on the cluster adapter. Don’t add any protocol like IPX/SPX/NetBIOS

lNote2: Do not enable Network Load Balancing remote control.

Step1. Give two Network Adapters to each VM, the following is Network Adapter1’s setting

Network Adapter2’s setting

 

Step2: Choose Network Adapter1 whose spoofing of MAC addresses is enable, and it responses for Network Load Balance(NLB) and re-named “NLB”

 

Step3: select TCP/IP setting.

 

 

 

 

Step4: Type TCP/IP setting.

 

 

Step5: Advanced Setting

 

lNote3: Uncheck Network Load Balance, and do not any setting about it.

 

Step6: Choose one VM to set “Network Load Balance Manager”, and click “New Cluster”

Step7: key in “Cluster IP”, and select “Unicast”, then Click “Next>”

 

 

Step8: key any IP or host name of the cluster, and then click “Connect”, then select “NLB” we re-name before.

 

 

 

Step9: key previous IP again in Dedicated IP, and select priority, and then click ” Finish”.

 

If we can see the status of each VM is “Converged”, thenthey make it.

 

 

And we can see “Network Load Balance “  that is checked automatically.

 

And Advanced TCP/IP Settings will be added “Cluster IP” automatically as well.